Laboratory thermohygrometer UNITESS THB1
Laboratory thermohygrometer UNITESS THB1
Laboratory thermohygrometer UNITESS THB1
Laboratory thermohygrometer UNITESS THB1
Laboratory thermohygrometer UNITESS THB1
Laboratory thermohygrometer UNITESS THB1
Laboratory thermohygrometer UNITESS THB1
Laboratory thermohygrometer UNITESS THB1
Laboratory thermohygrometer UNITESS THB1
Laboratory thermohygrometer UNITESS THB1
Laboratory thermohygrometer UNITESS THB1
Laboratory thermohygrometer UNITESS THB1
 
Thermohygrometer THB1 designed to measure temperature, relative humidity and atmospheric pressure in the calibration, measurement and testing laboratories and in other premises with the need to monitor environmental parameters
 
 

The thermohygrometer can take measurements, store them to memory and transfer data to a computer for further detailed analysis.

 

Advantages

Wireless solution based on the ISM radio channel

Wide-area coverage and high signal penetration:

  • up to 2 km in open area,
  • up to 500 m in urban area (including underground warehouses, radio waves penetrate through concrete structures)

Unlicensed ISM Radio Frequency Range 868 MHz

No need to deploy Wi-Fi networks, Etherneth, or other construction work.

 «Stand by» technology

 

Low power consumption thanks to asynchronous transfer mode – device wakes up only when have something to transmit. In data transfer mode (every 10 minutes), 3 AA batteries last for 1.5 years. It is possible to schedule data transmission at regular intervals.

In common mobile networks, devices are often forced to «wake up» to synchronize with the network and check messages for receiving and/or sending. Such synchronization leads to significant energy consumption and reduces the battery life.

Internal memory

In the the absence of radio signal, data accumulated and stored in internal device memory

Sensors are configured via USB or radio channel

The sensors do not have control buttons this guarantee complete elimination the human factor on system operation.

 

«Star» topology network

«Star» topology without repeaters makes it easy to expand the network. The entire building needs only one receiver, to which you can connect almost unlimited number of devices.

High scalability and flexibility

Easy to deploy a network over large areas

 

Thermohygrometer THB1 technical characteristics

Рarameter
Description
Screen Technology
E-Ink
Size
120*120*40 mm
Weight
400 g with batteries
Sensors
Temperature / RH / Ambient pressure
Antenna
Built-in, omni-directional
Configuration interface
Radio, USB
Setting parameters
Sensor name
Measuring interval, sec
Data transfer interval, sec
Limit values
Sensor ID format
Letters and numbers
English
Up to 6 characters
Notification about violation of  the limits
Screen
SMS
Pop-up in running software
Power type
AA х 3 pc.
Consumption
Supply voltage 1,5 V
Sleeping mode - 120 μA
Measurements - 5 mA
Data transfer - 50 mA
 
Thermohygrometer THB1 metrological characteristics
Рarameter
THB 1
THB 1B
THB 1C
Temperature measurement range
5...+50 ОС
Temperature measurement error
±0,3 OС
±0,5 OС
±0,5 OС
Temperature measurement resolution, display in %
0,1
Thermal reaction time
10 min
Relative humidity measurement range
от 10 до 90%
Humidity measurement error
±3,0%
Temperature measurement resolution, display in %
0,1
Atmospheric pressure measurement range
86…106 kPa
-
Internal memory type
FLASH
Internal memory
32 MB
Atmospheric pressure measurement error
±0,2 kPa
 
-
Atmospheric pressure measurement resolution
0,2
 
-
 
Thermohygrometer ТНВ1 is part of the wireless scalable indoor climate monitoring system UNITESS AMBIENT.