Industrial wireless thermometer THB2
Industrial wireless thermometer THB2
Industrial wireless thermometer THB2
Industrial wireless thermometer THB2
Industrial wireless thermometer THB2
Industrial wireless thermometer THB2
Industrial wireless thermometer THB2
Industrial wireless thermometer THB2
Industrial wireless thermometer THB2
Industrial wireless thermometer THB2
 
Industrial wireless thermometer THB2 designed to measure the temperature and humidity of air in the rooms of calibration, measurement and testing laboratories, archives, industrial, pharmaceutical, storage, as well as in other rooms with the need to monitor environmental parameters.
 
 

THB 2 can be installed in the refrigerator. The wireless solution transmits temperature values over the air. This means that for its work does not require expensive cable pulling and violation of the integrity of the body of the ref. It is enough to install the sensor inside the trailer on the self-tapping screws or double-sided tape.

 

Advantages

Wireless solution based on the ISM radio channel

Wide-area coverage and high signal penetration:

  • up to 2 km in open area,
  • up to 500 m in urban area (including underground warehouses, radio waves penetrate through concrete structures)

Unlicensed ISM Radio Frequency Range 868 MHz

No need to deploy Wi-Fi networks, Etherneth, or other construction work.

 «Stand by» technology

 

Low power consumption thanks to asynchronous transfer mode – device wakes up only when have something to transmit. In data transfer mode (every 10 minutes), 3 AA batteries last for 1.5 years. It is possible to schedule data transmission at regular intervals.

In common mobile networks, devices are often forced to «wake up» to synchronize with the network and check messages for receiving and/or sending. Such synchronization leads to significant energy consumption and reduces the battery life.

Internal memory

In the the absence of radio signal, data accumulated and stored in internal device memory

Sensors are configured via USB or radio channel

The sensors do not have control buttons this guarantee complete elimination the human factor on system operation.

 

«Star» topology network

«Star» topology without repeaters makes it easy to expand the network. The entire building needs only one receiver, to which you can connect almost unlimited number of devices.

High scalability and flexibility

Easy to deploy a network over large areas

 

Thermohygrometer THB2 technical characteristics

Рarameter

THB 2

THB 2 B

THB 2 С

Temperature measurement range

0 ... +50°С

– 25 ... +50 °С

Relative humidity measurement range,

10…90%

Humidity measurement error

less then ±3,0 %,

 

 

Moisture measurement resolution, display in %

0,1

Temperature measurement error Пределы абсолютной погрешности при измерении температуры, °С,

±0,5 °С

±0,5 °С

±0,5 °С

Temperature measurement resolution, display in %

0,1

0,1

0,1

Antenna type

external

Sensor type

internal

remote

Internal memory type

FLASH

Internal memory

32 MB

Setting parameters

room name, measurement interval, data transmission interval,

max values, radio channel parameters

PC connection interface

USB, radio channel

Alert type

on display, on PC, SMS

Displayed data

temperature and humidity, room name,  data transmission intervals, max values, frequency range, transmitter power, battery indicator

Measurement interval

from 1 to 90 min

Room name format

letters and numbers, up to 6 characters

Интерфейс конфигурирования

USB, radio channel

Consumption in sleep mode

max 50 uA,

Max consumption in the measurement and transmission modes

Less than 100 uA

Supply voltage, В

from 3,5 to 4,95 V

Radio channel

ISM- range

864,0 - 870,0 MHz

Transmitter power

25 mW

IP rating

IP65

Weight

290 g

250 g

350 g

Dimensions without antenna and sensor

less than 125х80х30 mm

 
Industrial wireless thermometer THB 2 is part of the wireless scalable indoor climate monitoring system UNITESS AMBIENT.
 
 
Related industries